|
Quality actuators for industrial
duties |
Designed for rugged industrial use, Servomech linear actuators incorporate
advanced design and materials for smooth, precise operation with long life and
low noise levels.
Actuators accept a range of IEC framed motors: dc, ac,
flameproof, braked and servo.
Optional stroke position switches and encoders
can be added.
Acme thread or ballscrew for 100% duty.
long service life
and lifetime calculations available.
Range of end fixings and rear
brackets. |
 |
Type ATL 02-08
Small dc linear actuators
A
range of robust industrial quality linear actuators that deliver economy and
long life. Each size is available with four different speed and force
profiles. |
|
 |
high quality 24V permanent magnet motors (12V
optional)
|
|
|
rated at 15% duty with rated load and speed
|
|
IP55 enclosure for sizes 02, IP65 on sizes 05,
08
|
| |
|
magnetic limit switches can be added
|
| |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
currents A |
| ATL02 |
9-47 |
1400 |
300 |
1.4-3.8 |
| ATL05 |
6-32 |
2000 |
300 |
1.2-4.8 |
| ATL08 |
8-64 |
4000 |
500 |
1-9 |
|
 |
Type CLA
20-40
Compact sized linear actuators
with
integral limit switches/potentiometer
The CLA range simplifies
installation by having cam operated stroke limit switches in an integral IP65
metal housing. Two or three switches are possible or a geared potentiometer can
replace the third switch.
|
|
|
ac or dc motors
|
|
|
rated as 15-30% duty, 100% available on request
|
| |
|
range of end fixings and rear brackets
available
|
| |
|
switch enclosure IP65, actuators IP55
|
| |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
powers
kW |
| CLA20 |
9-47 |
2000 |
400 |
0.06 |
| CLA25 |
2-64 |
4000 |
400 |
0.09-0.12 |
| CLA30 |
4-46 |
8000 |
400 |
0.25-0.55 |
| CLA40 |
4-46 |
12000 |
400 |
0.25-0.55 |
|
 |
Type ATL
10-40
Standard acme thread
actuators
A general purpose range of robust actuators with acme
thread leadscrew and nuts suiting duty cycles up to 30%. The nut is statically
reversible so no holding brake is needed to sustain the load in most
cases.
|
|
|
available with ac, flameproof, dc and servo
motors
|
|
|
suits 30% duty with rated load and speed
|
| |
|
enclosure IP54, higher on request
|
| |
|
optional end fittings, limit switches and
encoders
|
| |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
powers
kW |
| ATL10 |
2-100 |
3000 |
800
(1500 on
request)
|
0.06 |
| ATL20 |
1-100 |
4000 |
0.09-0.12 |
| ATL25 |
2-100 |
6000 |
0.09-0.15 |
| ATL30 |
4-100 |
10000 |
0.18-0.30 |
| ATL40 |
5-100 |
12000 |
0.37-0.55 |
|
 |
Type BSA
10-40
Standard ballscrew
actuators
The ballscrew design gives greater efficiency allowing
higher forces and continuous 100% duty operation at full rated force and speed.
A brake motor may be needed to hold the load.
|
|
|
suits continuous duties, lifetime calculations
available
|
|
|
accepts IEC framed motors – dc, ac, brake motors,
flameproof, servo
|
| |
|
IP54 enclosure, higher on request
|
| |
|
optional end fittings, limit switches and
encoders
|
| |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
powers
kW |
| BSA10 |
4.5-62 |
3000 |
800
(1500 on
request)
|
0.06 |
| BSA20 |
2.3-62 |
4000 |
0.09-0.12 |
| BSA25 |
4.5-62 |
6000 |
0.09-0.15 |
| BSA30 |
5-62 |
10000 |
0.18-0.30 |
| BSA40 |
5.5-60 |
15000 |
0.37-0.55 |
|
 |
Type UBA 0-4
High speed ballscrew actuators
Parallel
mounted motors with belt connection achieve high speeds. These actuators are
rated for continuous duty and can be combined with servo drives for unsurpassed
system performance.
|
|
|
accepts IEC framed motors – ac, dc and
servo
|
|
|
high linear speeds, brake motors as standard
|
| |
|
complete systems with encoder feedback and electronic drive are
available
|
| |
|
larger models available for speeds up to 1 m/s
|
| |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
powers
kW |
| UBA0 |
125-635 |
420 |
800
(1500 on
request)
|
0.07 dc only |
| UBA1 |
40-185 |
1800 |
0.09-0.12 |
| UBA2 |
40-180 |
4400 |
0.18-0.25 |
| UBA3 |
40-240 |
7200 |
0.37-0.55 |
| UBA4 |
48-480 |
12000 |
0.75-2.2 |
|
 |
Type ATL
50-80
Heavy duty acme thread
actuators
Heavy duty actuators with cast iron and steel
construction that deliver high forces at a wide range of speeds. Ideal for
replacing hydraulic cylinders.
|
|
|
designed for standard IEC framed ac motors
|
|
|
rated for 30% duty at rated force and speed
|
| |
|
IP55 enclosure, higher available
|
| |
|
proximity switches can be fitted as stroke
limits
|
| |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
currents A |
| ATL50 |
3-93 |
25000 |
1500
|
0.75-2.2 |
| ATL63 |
3-93 |
50000 |
1.5-3.0 |
| ATL80 |
5-140 |
80000 |
3.0-4.0 |
|
|
Type BSA 50-80
Heavy
duty ballscrew actuators
The higher efficiency of this ballscrew
design allows continuous duty with high dynamic loads. Service lifetime can be
calculated.
|
|
|
|
|
designed for standard IEC framed ac motors |
|
|
rated for 30% duty at rated force and speed |
|
IP55 enclosure, higher available |
|
proximity switches and second input shaft optional |
|
Size |
Speed range
mm/s |
Max push/
pull force N |
Strokes
up to mm |
Motor
powers
kW |
| BSA50 |
10-78 |
25000 |
1500
|
0.75-1.5 |
| BSA63 |
8-67 |
50000 |
0.75-3.0 |
| BSA80 |
15-117 |
80000 |
2.2-4.0 |
|
|
